0
0
Your shopping cart is empty.
Total: ${ $store.state.basket.data.itemSum | currency } (Gross) ${ $store.state.basket.data.itemSumNet | currency } (Net)
Trailer Sets (3)
Filter results
Availability
Price
€
€
Trailer & Towing Connection Systems for Rear View Cameras
Stable HD Connection Between Towing Vehicle and Trailer – Even in Daily Continuous Use
A trailer or towing connection system for rear view cameras is a professional, detachable connector system for secure signal transmission between the towing vehicle and the trailer.
It ensures that the camera image is transmitted reliably even with interchangeable bodies, vibration, moisture and 12–30V on-board electrical systems.
Especially for:
- HGVs with swap bodies
- vans with trailers
- motorhomes with trailers
- agricultural trailers
- fleets with multiple semi-trailers
a professional connection is not an accessory – it is a safety-relevant system component.
Why a Trailer Connection Is Not “Just a Normal Cable”
Many underestimate the stresses placed on a detachable connection:
- mechanical tensile forces
- vibration while driving
- moisture & dirt
- frequent coupling and uncoupling
- voltage fluctuations
Improvised solutions or simple extensions often lead to:
- loose contacts
- image flickering
- signal interruptions
- contact corrosion
At the critical moment – when reversing to a loading bay or yard – the camera image must not fail.
Economic Benefits in Professional Use
Damage while manoeuvring at a loading bay, trailer or semi-trailer can quickly result in four-figure costs – plus downtime and organisational effort.
A stable trailer connection significantly reduces the risk of signal problems and increases operational reliability.
In fleet operations, the rule applies: a single avoided incident can fully amortise the investment in a professional connection system.
Typical Practical Scenario
Swap body in distribution transport.
The trailer is uncoupled, repositioned and reconnected.
With inferior connector systems, play develops – the camera image flickers or briefly drops out.
A professional, screw-lock connection with shielded HD signal routing prevents exactly these situations.
Predictable visibility.
Predictable safety.
Decision Support – Are You in the Right Category?
You are in the right place if:
- a camera is installed directly on the trailer
- trailers or swap bodies are regularly exchanged
- manoeuvring damage should be avoided
- the camera system operates in daily use
Not the right category if:
- only the standard cable needs to be extended
- no detachable connection is required
In this case, extension cables for rear view cameras are the appropriate solution.
Compatibility – What to Check
Before selecting a system, the following points should be verified:
- signal type (AHD or CVBS)
- connector system (4-pin / 5-pin)
- on-board voltage (12V or 24V)
- number of cameras
If you are unsure which system matches your existing rear view camera set, please use our personal technical consultation – we will support you in selecting the right solution.
Planning a New System?
If you are looking not only for the connection but for a complete system for trailers or HGVs, you will find suitable solutions in our category Rear View Camera Sets for Trailers & Commercial Vehicles.
This ensures that camera, monitor and connection are perfectly matched.
Safety for Drivers and Surroundings
Especially in urban distribution traffic, people are often located in the immediate manoeuvring area.
A stable camera signal:
- increases reaction speed
- improves distance assessment
- reduces uncertainty when reversing
Trailer connection systems are therefore not a matter of convenience – they are part of a professional safety strategy.
Why Trailer Connection Systems from VSG24?
VSG24 stands for:
- tested HD signal quality
- robust, screw-lock connector systems
- durable materials
- availability of spare parts
- technical consultation
- over 20 years of experience in vehicle safety
Our solutions are developed for real operating conditions – not for theoretical installations.
Conclusion – Stable Connection for Maximum Control
A rear view camera on a trailer is only as reliable as its connection to the towing vehicle.
Professional trailer connection systems ensure:
- stable HD transmission
- reduced manoeuvring damage
- predictable operational safety
Invest in a professional trailer connection – before a signal issue becomes a safety risk.
FAQ - Frequently asked questions
A trailer set is required whenever the camera and monitor are not permanently installed on the same vehicle – for example with motorhomes and trailers, horse trailers, HGVs with semi-trailers or agricultural combinations.
Standard extension cables are not designed for these movable connections. VSG24 trailer sets provide a secure, weatherproof and vibration-resistant connection that can be quickly disconnected and reconnected. This significantly increases operational safety and prevents signal interruptions or cable damage.
Yes. VSG24 offers complete trailer solutions for up to four cameras simultaneously.
These sets allow multiple viewing angles on the trailer to be monitored – for example rear view, side views or interior monitoring (e.g. in a horse trailer). All cameras are connected via a single robust ELITE coiled cable between the towing vehicle and the trailer. This ensures clarity, organisation and maximum reliability.
A coiled cable is specifically designed for movable vehicle connections. It stretches during steering or manoeuvring and retracts again without dragging or remaining under tension.
This protects the cable, maintains flexibility and significantly reduces the risk of damage – particularly in daily trailer operation or with frequent coupling and uncoupling.
Yes. All VSG24 ELITE trailer sets are designed for permanent outdoor use.
The cables and connectors are IP67-certified, dustproof and waterproof, and protected against corrosion. Rain, snow, dirt or high-pressure cleaning present no issue – ideal for HGVs, agricultural use, motorhomes and horse trailers.
VSG24 trailer sets use the widely adopted 4-pin standard found in many rear view camera systems.
They are fully compatible with all VSG24 wired systems and can often also be used with other 4-pin third-party systems. If you are unsure, a brief enquiry with VSG24 support is recommended to ensure you select the correct solution.
The installation process is intentionally straightforward and practical.
The metal sockets are mounted on both the towing vehicle and the trailer. The coiled cable connects both sides using screw-lock, vibration-resistant connectors.
The system requires minimal tools for installation and enables quick coupling and uncoupling when different trailers are used.
Yes. VSG24 ELITE trailer sets are optimised for 1080P HD signal transmission.
High-purity copper, double shielding and high-quality connectors ensure stable transmission of video, audio and power – even over long distances between towing vehicle and trailer.
The sets are particularly suitable for:
- motorhomes with trailers or rear carriers
- horse trailers (safety & animal monitoring)
- HGVs with trailers or swap bodies
- agricultural combinations
- vans with regularly changing trailers
Wherever flexibility and reliability are essential.
VSG24 trailer sets are not simple extension cables but well-engineered system solutions.
They combine robust materials, secure connector technology, IP protection, anti-vibration locking and practice-oriented development. The result: fewer failures, fewer repairs and greater safety in everyday operation.
In this case, a brief consultation is worthwhile.
The VSG24 support team will help you select the appropriate trailer set for your vehicle, number of cameras and application – whether for a motorhome, HGV or horse trailer. This helps you avoid incorrect purchases and ensures your system operates reliably over the long term.
Filter and sort
